| Product Center |
|
|
 |
|
| |
|
 |
H300 Series
Economic Frequency Inverter
|
 | | |   | | |
Product Features:
(1) V/f
(2) Performance meets the GB/T12668-2002, IEC61800 standard.
(3) Built-in Modbus communication
(4) Easy for commissioning withquick start.
(5)Available formajor industrial applications.
(6)Own software with customized functions available
(7)Enforced PCB Painting for harsh environments
(8)Reliablequality with components designed in accordance with ten-year life.
Specification
0.4~2.2kw Input 120-400VDC/220-240VAC
0.75~11kw Input 250-850VDC/370-440VAC
|
Model
|
Rated input current（A）
|
Rated output current（A）
|
Motor power（kW）
|
Size（mm）
|
|
H
|
W
|
D
|
|
H300-0R4G-S2/T2
|
6.3/3.2
|
2.5/2.5
|
0.4
|
142
|
85
|
112
|
|
H300-0R75G-S2/T2
|
11.5/6.3
|
5.0/5.0
|
0.75
|
|
H300-1R5G- S2/T2
|
15.7/9.0
|
7.0/7.0
|
1.5
|
151
|
100
|
165
|
|
H300-2R2G- S2/T2
|
27.0/15
|
10/10
|
2.2
|
Basic performance and configuration
|
Item
|
Instruction
|
|
Power supply input
|
Rated voltage
|
S2(Single phase 220V): Single phase AC, (200-240)V
|
|
T2 (Three phase 220V ) : Three phase AC (200-240) V
|
|
Rated frequency
|
50/60Hz ± 5%
|
|
Power output
|
Output voltage
|
0-100% output voltage
|
|
Rated output current
|
It depends on model selection. Please see the standard specification.
|
|
Overload capability
|
150% rated output current 60s and 200% rated output current 2s.
|
|
Control performance
|
Control mode
|
Constant torque V/f, Quadratic load V/f, No PG vector control, Energy saving mode
|
|
Frequency set mode
|
Outside terminals (including logic multi-step, analog input, UP/DOWN given), keypad panel, series communication.
|
|
Command given mode
|
Outside terminals ( i.e. Logic input), keypad panel, series communication.
|
|
Frequency set precision
|
Keypad panel, UP/DOWN given: 0.1Hz
|
|
Analog given, series communication: 10bit（0.05Hz/50Hz)
|
|
Low frequency torque
|
No PG V / f control: 150% rated torque / 3Hz
|
|
|
No PG vector control: 150% rated torque /0.5Hz
|
|
Speed control range
|
No PG V/f control 1:40
|
|
No PG vector control 1:200
|
|
Speed control precision
|
No PG V/f control ±2%
|
|
No PG vector control ±0.2%
|
|
Acceleration or deceleration time
|
0-3200.0 seconds
|
|
Switching frequency
|
1.5kHz～12kHz, It could automatically low down switching frequency according to the junction temperature.
|
|
Control power supply
|
Output voltage
|
10VDC±5%（1 way），24VDC±5%（1 way）
|
|
Maximum load
|
10V:Maximum current 10mA, which is used on bench potentiometer.
24V: Maximum current 100mA, which is used for logic entrance.
|
|
Analog input
|
Quantity
|
2 ways：AI1、AI2
|
|
Type
|
DC voltage or DC current
|
|
Maximum input range
|
AI1：0-5VDC，or 0-10VDC，or 0/4-20mADC
AI2：0-10VDC，or PTC probe input or PTC
|
|
Analog output
|
Quantity
|
l1 way，AO1
|
|
Type
|
DC voltage or DC current
|
|
Maximum output range
|
0-10VDC，or 0/4-20mADC
|
|
Function selection
|
Output frequency, output current, speed given, series output data and many other functions.
|
|
Item
|
Instruction
|
|
Logic input
|
Quantity
|
l 7 ways，LI1、LI2、LI3、LI4、LI5、AI1、AI2
Remarks: AI1 and AI2 could be configured as logic input terminals (positive logic or negative logic)
|
|
Type
|
Positive logic (Source) or Negative logic (Sink)
|
|
Input voltage
|
0-24VDC
|
|
Function selection
|
Forward, reverse, run, fault reset, multi-step speed and many other functions.
|
|
Logic output
|
Quantity
|
2 ways: pulse signal output (LO-CLO), relay output 1 （T1A、T1B、T1C）
|
|
Pulse signal output
|
Open collector, output frequency, output current, speed given and other output functions.
|
|
Relay output
|
T1A constant open, T1B constant close, T1C public contact
Contact capacity:
T1A：5A @ 250VAC，5A @ 30VDC
T1B：3A @ 250VAC，3A @ 30VDC
Function selection: fault, alarm, set frequency arrival and many other functions.
|
|
Communication interface
|
Hardware interface protocol
|
RS-485
|
|
Software communication protocol
|
Modbus
|
|
Structure
|
Protection level
|
IP20
|
|
Cooling method
|
Forced cooling
|
|
Environment
|
Installation place
|
Indoor
|
|
Working temperature
|
-10～40ºC
|
|
Storage temperature
|
-20～60ºC
|
|
Humidity
|
Below 95RH%（no condensation）
|
|
Altitude
|
Below 1000m
|
|
FMZ Parts ( EMI Filter & Reactor ) can work for below branded VFD (AC Drive, Frequency inverter, Variable frequency drive, VSD, Inverter)
ABB, SIEMENS, DANFOSS, VACON, SEW, LENZE, PETER ELECTRONIC, LEISTER, WATT DRIVE, KEB, BONFIGLIOLI, NORD, CAG ELECTRIC MACHINERY, INTECNO, SYCOTEC, KB ELECTRONICS, TDE MACNO SPA, GEFRAN, CONTROL TECHNIQUES, PEPPERL FUCHS, GRUNDFOS, VEM MOTORS, BR INDUSTRI-ELEKTRONIK, RK ROSE+KRIEGER, CARLO GAVAZZI, LEROY SOMER, VERLINDE, TRANSTECNO, STAHL CRANE SYSTEMS GMBH, MIYACHI, DEMAG CRANES COMPONENTS, ABM, ROSSI, COGNITO QUAM, GE, AIRTECNICS, Delta, Teco, Toshiba, Mitsubishi, fuji, Yaskawa, Hitachi, Omron, Panasonic, HYUNDAI, LS/LG.
Key Words / Main Products:
Frequency inverter, inverter, AC Drives, frequency converters, frequency changers, adjustable speed drives (ASD), adjustable frequency drives (AFD), variable frequency drives (VFD), variable speed drives (VSD), Soft Starters, Soft Stop, Soft Starters for AC Motor, Motor Starters, Motor Soft Starters, EMI filter, Input EMI Filters, Output EMI Filters, AC Choke, AC Reactor, Input AC Choke， Output AC Choke， Input AC Reactor, Output AC Reactor, DC Choke, DC Reactor, Input DC Choke, Output DC Reactor, Input DC Reactor, HMI, Human Machine Interface,PLC，Programmable Logic Controller, Servo Drive, Servo Motor, Servo Motor & Drive, Servo Motor & Drive System
|
 |
|
